Memory Menu
Item
RECEIVE BUFF SIZE
RESOURCE SAVE
FLASH
INITIALIZE
The default settings are bold.
Value | Description |
Auto; OFF; 0.5 MB; | Sets the size of the receive buffer. |
1 MB; 2 MB; 4 MB; 8 | Depends on the amount of memory |
MB; 16 MB; 32 MB | installed in the printer. |
AUTO; Off; 0.5 MB; | Set the size of the font cache area. |
1 MB; 2 MB; 4 MB; 8 | Depends on the amount of memory |
MB; 16 MB; 32 MB | installed in the printer. |
Execute | Ordinarily, you should not use this. |
| Initializes flash memory (if installed) |
PS FLASH | 0% [n.n MB] TO 90% | Ordinarily, you should not use this. |
RESIZE | [n.n MB], in 10% | Changes the size of the flash |
| increments | memory area. |
|
| “n.n” indicates the actual size in MB. |
|
| You cannot specify 100%, because |
|
| special data is stored in the Flash |
|
| Memory. |
|
|
|
Executive Series 2426 Printer Family User’s Guide
Setting Up • 112