Power
Turn Off the Printer
Hard Disk Drive installed
Shutdown Sequence
CAUTION!
•NEVER turn the printer off while it is printing.
•If the optional hard disk has been installed, the following procedure MUST BE FOLLOWED before turning off the printer. This protects any data that is stored on the hard disk.
•Follow this procedure every time the printer is turned off for any reason.
•After turning the printer off, wait at least 10 seconds before turning it on again. This allows the internal power levels to drop. Turning on too soon could cause the printer to malfunction.
Use Power Save to avoid turning off the printer.
Refer to “POWER SAVE Mode” on page 57.
If you MUST turn off the printer:
1.Press MENU until SHUTDOWN MENU displays
2.Press SELECT.
3.Press SELECT again to begin the shutdown sequence.
4.When PLEASE POWER OFF SHUTDOWN COMPLETED displays, use the on/off switch to turn off the printer.
Wait at least 10 seconds before turning it on again. This allows the internal power levels to drop. Turning on too soon could cause the printer to malfunction.
Executive Series 2426 Printer Family User’s Guide
Setting Up • 60