Overlays
Windows NT: PCL
Defining
1.Click Start → Settings → Printers.
2.Highlight the printer name. Click Document Defaults.
3.Click the Job Options tab.
4.Click the Overlay... button.
5.To define an overlay, click the Define Overlays button.
6.In the Overlay Name list, enter the file name of the overlay
NOTE
The Overlay Name must be EXACTLY the same as the file name you noted in the previous section. This is the name under which the file is stored on the printer’s hard disk drive. It is case sensitive.
7.In ID Values, enter the ID of the file. Please refer to the instructions for the Storage Device Manager utility.
8.Select which pages the overlay is to be printed on from Print on Pages or use Custom Pages to select specific page numbers in the document. Click Add.
9.Click Close.
10.Repeat steps 5 though 9 for each overlay you wish to add.
11.Under Defined Overlay, highlight the overlay name. Click the Add button to add the overlay to the list in Active Overlays.
12.Select Print Using Active Overlays.
13.Click OK.
14.Click OK to close the Default dialog box.
Executive Series 2426 Printer Family User’s Guide
Storage Device Manager for Windows • 642