Item
POWER SAVE DELAY TIME
PERSONALITY
USB
NETWORK
PS PROTOCOL
CLEARABLE WARNING
AUTO
CONTINUE
MANUAL
TIMEOUT
System Configuration Menu
The default settings are bold.
Value | Description |
5 min; 15 min; 30 min; | Sets the time the printer “waits” |
60 min; 240 min | before entering power save mode |
| See page 57. |
Auto emulation; | Selects the printer emulation |
PCL; IBM PPR III XL; | language. |
Epson FX; | The only printer languages that can |
AdobePostScrip | be selected are those enabled |
| through the Personality item of the |
| |
| The Maintenance Menu is only |
| accessed by Authorized Service |
| Technicians. |
ASCII | Specifies PostScript (PS) |
RAW | communication protocol mode of |
| data from USB. |
| In RAW mode, |
ASCII | Specifies PostScript (PS) |
RAW | communication protocol mode of |
| data from the network print server. |
| In RAW mode, |
ON; Job | PCL: Controls how error messages |
| are displayed. |
| On = press SELECT to display |
| the error. |
| Job = the error remains |
| displayed until the next print job |
| is received. |
| PostScript (PS): Error messages |
| are only shown during the print job, |
| regardless of setting. |
On; Off | ON = printer recovers automatically |
| after a memory overflow or print |
| overrun. |
60 sec; 30 sec; Off | This is the time the printer “waits” to |
| cancel a print job when paper is not |
| inserted after a request for paper is |
| issued. |
| PostScript (PS) only. |
Executive Series 2426 Printer Family User’s Guide
Setting Up • 97