
9.Identify the RAM expansion slot in the printer. Unclip the plastic cover to open this slot.
b
a
10.As the RAM expansion slot already contains a memory board (64Mb), this board will have to be removed before you can install the new one. To remove it proceed as follows:
(a)Identify the locking clips at each end of the RAM expansion slot.
(b)Push the clips outward and back into the printer. The board will pop out slightly.
(c)Grip the board firmly by its short edges and pull it out of the slot.
(d)Place the removed memory board in the antistatic bag which originally contained the new memory board.
11.Hold the new memory board by its short edges, so that the edge connector faces in towards the RAM expansion slot, and the small cutout is closer to the bottom of the printer.
Installing additional memory > 120