Activate Installed Options in the Driver
7.Click Configure.
8.Optional Trays: To engage optional trays, change the setting for Available Tray to 2 or 3 depending on how many trays you have installed.
9.Duplex Unit: To engage the Duplex Unit, change the setting to Installed.
10.Hard Disk Drive: To engage the hard disk drive, change the setting to Installed.
11.DIMMs: To engage additional memory, set Memory Configuration to the new total value of memory installed (standard memory + any installed optional DIMM memory).
12.When done, click OK.
13.Click OK.
14.Close Chooser.
6