Main
Instruction Manual
Underwater Case
PT-023
E-1
Disclaimer
Please read the following before using the product
For safe use
WARNING
E-2
WARNING
E-3
Batteries
E-4
For Prevention of Water Leakage Accidents
E-5
Handling the Product
E-6
E-7
Contents
Contents 1. Preparations
2. Advance Check of the Case
3. Install the digital camera.
E-8
4. Taking Pictures Under Water
5. Handling After Shooting
6. Maintaining the Waterproof Function
7. Appendix
E-9
1. Preparations
Information disc
Warranty card
Check the contents of the package.
E-10
Names of the parts
:The Case operation parts marked by
Note
E-11
Install the strap.
Master the basic operation.
Holding the Case
E-12
How to Press the Shutter
How to Use the Zoom Lever
How to Use the Mode Dial
E-13
Setting the Zoom Lever
Power Switch Button Operation Method
Popping up the Flash
E-14
Removing
Attaching
Removing/attaching the standard port
E-15
Detaching/attaching the diffusion plate
E-16
Removing the TTL cable connector cap
---- How to attach the TTL cable connector cap to the case ----
E-17
Removing the hot shoe cable cap
1
3
E-18
2. Advance Check of the Case
Advance test before use
Making sure the case is waterproof
Cleaning the TTL connector
E-19
Advance Test
E-20
3. Install the digital camera.
Check the digital camera.
Battery Confirmation
Confirmation of the Remaining Number of Pictures to be Taken
E-21
E-22
Fitting the mode dial knob
Load the digital camera.
Insertion of silica gel
E-23
Seal the Case.
Check the loading status.
E-24
E-25
E-26
Final Test
E-27
4. Taking Pictures Under Water
How to Use the Hand Strap
Take pictures carefully. Confirm the picture on the LCD monitor.
Quietly press the shutter lever.
E-28
5. Handling After Shooting
Wipe off any waterdrop.
E-29
Take out the digital camera.
E-30
Wash the Case with pure water.
Dry the Case.
E-31
6. Maintaining the Waterproof Function
Remove the O-ring.
Remove any sand, dirt, etc.
E-32
Install the O-ring.
How to Apply Grease to the O-ring
E-33
Maintenance of the threaded sections on the TTL cable and TTL cable connector
Maintenance of the TTL Connector Cap
E-34
Replace consumable products.
1
2
E-35
7. Appendix
Q & A on the use of the PT-023
E-36
E-37
E-38
E-39
E-40
After-sale Service
E-41
Specifications
Diver's Insurance Guide
