Button operations
16
EN
Press NY in shooting mode to select ON or OFF for the self-timer.
Press to set.
• After setting the self-timer, press the shutter button completely. Then, the self-timer lamp
lights for approximately 10 seconds, blinks for approximately 2 seconds, and the shutter is
released.
• To cancel the self-timer, press NY.
• Self-timer shooting is automatically canceled after one shot.
Press Y# in shooting mode to select the flash mode.
Press to set.
Displays the top menu.
The monitor lights brighter when is pressed in shooting mode. If there is no operation for
10 seconds, it dims back to the original brightness.
• When [BRIGHT] is selected in [s], the monitor brightness does not change.
In playback mode, select the picture you want to erase, and press S.
• Once erased, pictures cannot be restored. Check each picture before erasing to avoid
accidentally erasing pictures you want to keep.
g“0 Protecting pictures” (P.25)
NY button Self-timer shooting
OFF Cancel the self-timer.
ON Set the self-timer.
Y# button Flash shooting
AUTO Flash auto The flash fires automatically in low light or backlight conditions.
!Red-eye reduction
flash
This emits pre-flashes for red-eye reduction.
#Fill-in flash The flash fires regardless of the available light.
$Flash off The flash does not fire.
m button Displaying the top menu
/S button Increasing the brightness of the monitor (Backlight boost)/
Erasing pictures
Increasing the brightness of the monitor (Backlight boost)
S Erasing pictures
a
b
c
d