Menu operations
28
EN
The pixel mapping feature allows the camera to check and adjust the CCD and image
processing functions. It is not necessary to operate this function frequently. Approximately
once a year is recommended. Wait at least one minute after taking or viewing pictures to
allow the pixel mapping function to perform properly. If you turn the camera off during pixel
mapping, start again.
Select [PIXEL MAPPING]. When [START] is displayed, press .
• Select [MY FAVORITE] and press Y to set a still picture registered in “My Favorite” as the
background.
g“SET Registering favorite pictures” (P.24)
You can set the following with [SOUND SETTINGS].
• Setting the volume of the button operation sound. (BEEP)
• Selecting the volume of the shutter button. (SHUTTER SOUND)
• Adjusting the volume of the camera warning sound. (8)
• Adjusting the volume during playback. (q VOLUME)
• You can set all the sounds muted at once by setting [SILENT MODE].
g“SILENT MODE Muting operational sounds” (P.23)
PIXEL MAPPING..................................................Adjusting the image processing function
K/q.........................................................Turning on the camera with the K or q button
YES Pressing K turns on the camera and starts the camera in the shooting mode.
Pressing q turns on the camera and starts the camera in the playback mode.
NO The power is not turned on. To turn on the camera, press o.
MENU COLOR ......................................... Setting the menu screen color and background
NORMAL / COLOR1 / COLOR2 / COLOR3 / MY FAVORITE
SOUND SETTINGS .........................................Setting the sound output from the camera
BEEP OFF (No sound) / LOW / HIGH
SHUTTER SOUND OFF (No sound) / LOW / HIGH
8OFF (No sound) / LOW / HIGH
q VOLUME OFF (No sound) / 1 / 2 / 3 / 4 / 5
s..........................................................................................Adjusting the monitor brightness
BRIGHT/ NORMAL