EN 61
Using OLYMPUS Master
Note
• If your computer is running Windows Vista, you can select [PC] in Step 3 on page 58, press
3, and select [MTP] to use Windows Photo Gallery.
• Data transfer is not guaranteed in the following environments, even if your computer is
equipped with a USB port.
- Computers with a USB port added by means of an extension card, etc.
- Computers without a factory-installed OS and home-built computers
Please take care that your battery is fully charged!
1Make sure that your computer is connected to the Internet.
2Plug the USB cable into the USB port on the computer.
3Plug the other end of the USB cable into the camera’s USB
connector.
• The camera turns on automatically.
• The monitor turns on and the selection screen for the USB connection is displayed.
4Select [PC], and press o.
5In the browse window, select “Camera”, then “Update Camera/Add
Display Language”.
• The confirmation window for updating is displayed.
6Click “OK”.
• The updating the camera window is displayed.
7Click “Add Language” in the
updating camera display.
• The “Add Display Language of Camera”
window is displayed.
8Click and select a language.
9Click “Add”.
• The new language is downloaded to your
camera.
Please do not remove any cable or the battery
while the camera is processing.
10After the download procedure the camera display will show “OK”.
You can remove the cables and turn power off. After restarting the
camera you will be able to choose the new language from [SETUP].
To increase the number of languages
d4355_e_unified_forU-Print_00_bookfile.book Page 61 Thursday, July 12, 2007 11:01 AM