a
aCurrent folder

Getting Started

Recording

Playing Back

DIGITAL VOICE RECORDER

VN-1000

VN-2000

EN INSTRUCTIONS
Thank you for purchasing an OlympusDigital Voice Recorder.

Please read these instructions for information about using the product correctly and safely.

Keep the instructions handy for future reference.

To ensure successful recordings, we recommend that you test the record function and volume before use.

Inserting Batteries
1 Lightly press down on the arrow and slide the battery cover open.2 Insert two size-AAA alkaline batteries, observing the correct polarity.3 Close the battery cover completely.

Time/Date screen appears. The hour indicator flashes, indicating the start of the Time/Date setup process. (See “Setting Time/Date” for details)

An optional Ni-MH Rechargeable Battery fromOlympus can be used for the recorder.YReplacing Batteries

When appears on the display, replace the batteries as soon as possible. Size-AAA

Hold
Set the HOLD switch to the HOLD position.

All operation buttons are disabled. This feature is useful when the recorder has to be carried in a handbag or pocket.

Remember to reset the HOLD switch before attempting to use the recorder.Notes

• The alarm will sound at the scheduled time even if the recorder is set to HOLD. The recorder will then begin to play the file associated with the alarm once you press any button.

The recorder functions as follows with the HOLD switch set to the HOLD position:

If the recorder is playing, the display goes dark when playback of the current file has completed.

– When you set the HOLD switch to the HOLD position while playing back, you can still adjust the volume using the VOLUME control.

– If the recorder is recording, the display goes dark when the recorder stops recording automatically upon running out of free memory.

Clip
1 Press the FOLDER button to select the desired folder (A,

 

B, C or S).

 

When you select folder S, the

 

current date subfolder appears

 

on the display.

 

• If you select folder S, press the

2

+ or – button to select the desired
date subfolder.
2 Press the REC button to

3

start recording.
The Recording/playing lamp
turns red, and recording starts.

1

3 To stop recording, press the

 

STOP button.
New recordings are saved as the last file in the folder.Y To Pause Recording

a

aCurrent folder

b

bDate to record

c

d

e

f

2

MAX

4

3

MIN

1

 

1 Press the FOLDER button to select the desired folder (A, B, C or S).

2 Press the + or – button to select the file to play back. If you select folder S, select the desired date subfolder.

When you select the desired date subfolder, it is useful to press and hold the + or – button for 1 second or longer. The recorder locates the next date subfolder that contains recorded files.

3 Press the PLAY button to start playback.

The Recording/playing lamp turns green, and the elapsed playing time is indicated on the display.

4 Use the VOLUME control to adjust the volume to your liking.

a

b

c

aCurrent folder bCurrent file

numbercPlaying time

alkaline batteries are recommended. When the batteries are depleted, appears on the display, and the recorder shuts off. It is recommended to set the HOLD switch to the HOLD position before you replace batteries to maintain the current settings (time/date, etc.). For your convenience,the recorder also logs the current settings in nonvolatile memory at hourly intervals.

YStandby Mode and Display Shut Off

If the recorder is stopped or paused for 5 minutes or longer during recording or playing, it goes into Standby (power-save) mode, and the display shuts off. To exit Standby mode and turn on the display, press any button.

How to Use the Clip
To pausePress the REC button during recording.,“PAUSE” appears on the display and the Recording/playing lamp flashes.To resume recordingPress the REC button again.,Recording will resume at the point of interruption.
cCurrent recording modedCurrent file

number

eRecording time fRemainingrecording time (REMAIN)
Y Canceling PlaybackTo stopPress the STOP button.,The recorder stops in the middle of the file being played.To resume playbackPress the PLAY button again.
Identification of Parts

 

Microphone jackMicrophone

 

 

 

ClipEarphone jack

 

 

 

Display (LCD panel)

 

Recording/playing lampBuilt-in speaker
REC (Record) button

 

DISPLAY button

 

ENTER button/INDEX button

 

STOP button

 

VOLUME control

0

(Rewind) button/ – button

 

 

PLAY button

 

Setting Time/Date (TIME)

If you have set the time and date, information as to when a sound file was recorded is stored automatically with that file.

The time and date must be set to enable management of files in folder S, for the alarm playback function, and for the timer recording.

When you install batteries for the first time or each time you replace the batteries, the hour indication will flash. In such a case, be sure to set the time and date by following steps 5 through 9 described below.

 

1

Press and hold the MENU button for

 

 

1 second or longer.

 

2

Press the STOP or PLAY button until

 

 

“TIME” flashes on the display.

2,4,6

3

Press the ENTER button.

4

The hour indicator flashes.

3,5,7

Press the STOP or PLAY button to set

5

the hour.

 

Press the ENTER button to accept the

1,8

 

minute.

 

The minute indicator flashes.

 

Pressing the – button enables the hour
Press the area that the arrow points to.Do not force the clip wider, as it may break.
Notes on the Folders
The recorder has four folders: A, B, C, and S.

To change the folder selection, press the FOLDER button while the recorder is stopped.

• Folders A, B, and C

Each recorded file is stored in a folder. Using folders to classify files makes it convenient to find files you want to access later.

Folder S

This folder has date subfolders* from January 1 to December 31. Up to 10 files can be stored in each date subfolder, a useful feature for schedule management by storing a certain day's schedule for future reference.

To switch between date subfolders, select the S folder, then press the + or – button while the recorder is stopped. Up to a total of 100 files can be recorded in folder S.

*There is one subfolder for each day of the year.
Folder AFolder BFolder C

Folder S (schedule)

Notes

If “FULL” appears on the display, you cannot record in the selected folder. In such a case, erase unnecessary files.

If the recorder is placed directly on a table when recording a meeting, it tends to pick up table vibrations. Put a notebook or other item between the table and the recorder for clearer recording.

Even if you press the DISPLAY button, the display will not change to current recording time if the remaining recording time is 5 minutes or less.

When remaining recording time falls to 1 minute or less, the Recording/playing lamp flashes red.

The recorder will enter stop mode if it has been left paused for 10 minutes or longer.

In case of difficult acoustic conditions or low speaker’s voice, recording in HQ or SP is recommended. Also, usage of an external microphone (sold separately) could improve the quality of recordings.

LCD Display Information

You can select an option for the display of the recorder. This help review and confirm different recorder settings and file information.

,Playback will resume at the point of interruption.

When you play back a file in the date subfolder without choosing a specified file, the recorder will play back all the files in the selected date subfolder from filename “01”. When you play back a file immediately after recording the file, only the most recently recorded file will be played back.

Y Forwarding and RewindingFast ForwardPress and hold the 9 button while playing a file.,When you release the 9 button, the recorder will resume normal playback.RewindPress and hold the 0 button while playing a file.,When you release the 0 button, the recorder will resume normal playback.

No sound is heard from the built-in speaker during fast forwarding or rewinding.

The end of the file is located by pressing and holding the 9 button during fast forwarding. The recorder will pause at the end of the file. If you do not release the 9 button, the recorder will continue fast forward.

The beginning of the file is located by pressing and holding the 0 button during rewinding. The recorder will pause at the beginning of the file. If you do not release the 0 button, the recorder will continue rewinding.

Y Changing Playing Speed

You can change the playing speed by pressing the PLAY button while the recorder is playing back.

Normal speed

Slow playback

Fast playback

 

( -20%)

(+30%)

ERASE button9 (Fast Forward) button/ + button
Battery cover
MENU button/
FOLDER button

 

U1-BZ8117-01AP0504

 

setting again.

6

Press the STOP or PLAY button to set

 

the minute.

 

Repeat steps 5 and 6 to continue to set

 

the year, month and date in the same way.

7

After setting the date, press the ENTER

 

button.

 

This completes the time/date setup

 

procedure.

8

Press the MENU button.

You can switch the time indication between the 12-hour system and the 24-hour system by pressing the DISPLAY button while you are setting the hour or minute.

You can change the order of the date indication by pressing the DISPLAY button while you are setting the year, month, or day.

(Example: February 14, 2005)
File

Date subfolder

 

 

Maximumof100files

 

 

100filesinfolderS.

 

 

 

of

Maximum of 100 files in each folder

 

Maximum of10filesMaximum
Total of 300 files.

File

 

 

 

State of therecorderWhile in stop modeWhile in record modeWhile in playback mode
OperationDisplay

 

 

Press and holdThe total number of files recorded in the folder
the STOP buttonand remaining recording time appears on the

 

display.

 

 

Press theTime Remaining recording time Date
DISPLAY buttonTime . . . (with folder A, B or C selected)

 

The selected indication appears on the display

 

each time the recorder is stopped.

 

 

Press the

The display switches between current recording

DISPLAY button

time and remaining recording time.

 

 

Press the

Playing time Remaining playing time

DISPLAY button

Recording date of the file Recording time of

 

the file Playing time . . .

When the slow playback mode is selected, the “SLOW” appears and, for the fast playback mode, “FAST” appears on the display while the recorder is playing back.

The recorder stops playing when you press the STOP button while playing back in the slow/fast mode, or when it reaches to the end of the file. If you once press the STOP button and start playback again, the recorder will play back files in normal speed as well.

Y Locating the beginning of the file

While the recorder is playing back in the slow/fast mode, pressing the + or button forwards or rewinds to the beginning of the previous or next file respectively. If an index mark is encountered midway, playback begins at that point. (See “Index Marks” for details)

Y Listening with earphonesYou can listen to files by connecting earphones to the earphone jack.

If an earphone is connected, the speaker doesn't emit sound. Sound will be played back monaurally.

*You can use any standard 3.5mm monaural earphone or headphone.

– 1 –

– 2 –

– 3 –

– 4 –

– 5 –