8.BASIC PROGRAMMING
8.4 Chart Speed Programming
Program the chart speed before operation.
• Press SHIFT and 1 simultaneously in the
CHART
operation screen to display the [Chart speed] programming screen.
•For the remote contacts (option), read Section13.3.
•0000mm/h can be set for RD2800. When 0000mm/h is set, chart is fed at the speed of 12.5mm/h.
Programming range
0001 to 0600 (mm/h)
or
0001 to 0200 (mm/h)
1 Programming Mode
Speed unit (Fixed) Cursor Chart speed (4 digits programming) （H/M）
Character display
Programming lamp
Speed unit
(H or M)
CursorMemory colon
2 | Programming Flow Chart |
|
|
|
|
| ||
<Example> From 20 mm/h to 50 mm/h |
|
|
|
|
| |||
|
|
| Operation screen |
| DISP |
| ||
|
|
|
|
|
|
|
| |
|
|
|
|
| SHIFT | ＋ | 1 |
|
| [Check] |
|
|
| CHART |
| ||
|
|
|
|
|
|
|
| |
| | | |
|
|
|
|
|
| Speed unit |
| Chart speed |
|
|
|
|
|
|
|
|
|
| SET |
|
|
|
| [To be ready for programming] |
| END |
|
|
| ||
|
|
|
|
|
| |||
| | | |
|
|
|
|
|
|
|
| Cursor |
| |
|
|
|
|
|
|
|
|
|
|
| |
| [Programming chart speed] |
| 0 | 0 | 5 | 0 | ||
| CLEAR | CLEAR | DATA I | CLEAR | ||||
|
|
|
|
|
| |||
| | | |
|
|
|
|
|
|
|
| Cursor |
|
|
|
|
|
|
|
|
|
| ENTRY |
|
|
|
| YES |
| Error message appears? |
|
| |||
| Keys other than |
|
| |||||
| NO |
|
|
|
|
| ||
| SHIFT |
|
|
|
|
|
| |
|
|
| Stored |
|
|
|
| |
Changing the speed unit (h/m)
Move the cursor to the character display (a digit on the left) then press
/or % to switch “M” and “H” alternatively.
Programmed chart speed
•Cursor and programming lamp light.
•Cursor moves rightward when pressing a numeric key.
Cursor moves rightward.
℃Cursor moves leftward.
Program the chart speed within 0001 to 0600 mm/h or 0001 to 0200 mm/min.
An error occurs if a value exceeds the programming range or any space or decimal point is entered.
The new programmed value is stored into memory.
Memory colon blinks and the programming change mark 
is printed.
Remarks 1 | If 150 mm/h or more is | |
programmed for the chart speed | ||
| ||
|
|
No printing, except time line, data printing and programming change mark, is executed.
Remarks 2 Influence to periodic data printing
When changing the chart speed, the programmed parameters for [periodic data printing] (Section 11.7) is cleared. (Default: Not programmed)
－４４－
