Onkyo CR-N1 Selecting preset stations, Use the Tuning, 3While “– –”is flashing, use the Tuning, (/) buttons to select a preset from 1 through

MEMORY

Listening to the radio

AM

FM

PRESET ( / )

INPUT

3While “– –” is flashing, use the Tuning(/) buttons to select a preset from 1 through 30.

Selecting preset stations

Preset stations can be selected as follows.

1To select either FM or AM, press the INPUT button on the CR-N1 repeatedly until “FM” or “AM” appears on the dis- play, or press the FM or AM button on the remote controller.

STEREO

MEMORY

MHz

When you select a preset that already contains a station, the preset number flashes quickly. You can overwrite such presets by continuing with this procedure. Alternatively, select an available preset.

4While the preset number is flashing, press the MEMORY button to store the selected preset (the MEMORY indicator disappears and the preset number stops flashing).

Remote controller

or

2Use the Tuning (/) but- tons, or the PRESET (/) buttons on the remote controller to select the pre- sets.

Remote controller

AUTO STEREO

MHz

Note that you must press the MEMORY button while the preset number is flash- ing, otherwise, you’ll have to start the procedure again at step 2.

The message “FULL” appears if you attempt to store more than 30 presets.

If the tuned FM station supports RDS Program Service Names (PS), the station’s name is displayed instead of its frequency.

43