5Use the cursor buttons (2/3/5/∞) to adjust the settings.
Adjust these while a disc is playing to see the effect of changes immediately.
6Repeat steps 4 and 5 to make adjustments to other settings.
If you would like to save the settings in the player’s memory, be sure to select either [1], [2], or [3] in the [Memory] setting to establish which memory location to save the new settings in. Please note that if you select a location where settings have already been saved, the old settings will be replaced by the new ones.
(Screen display during interlace set up of component output)
Interlace Memory |
| Off | 1 | 2 3 |
Move | ENTER Select | DISPLAY | Check | |
7When you are finished making adjustments, press ENTER to establish the new settings.
■Adjusting the picture quality settings
– To create your own setting (2)
1Use the cursor button (3) to select [Start] then press
ENTER.
(Screen display during
interlace set up of component output)
Interlace Video Memory Select
Interlace Video Setup
2Use the cursor button (∞) to select [Interlace Video Setup] and press ENTER.
3Press DISPLAY.
|
|
|
|
|
|
|
| (Screen display during |
|
|
|
|
|
|
|
| interlace set up of component |
|
|
|
|
|
|
|
| output) |
Fine Focus |
|
| On |
| Off | |||
Contrast | min |
|
|
| max |
| ||
|
|
| ||||||
Sharpness | soft |
|
|
| fine |
| ||
Chroma Level | min |
|
|
| max |
| ||
Hue | green |
|
|
| red |
| ||
Interlace Memory |
| Off | 1 | 2 | 3 |
| ||
|
|
|
|
|
|
|
|
|
4Use the cursor buttons (5/∞) to select the setting and use the cursor buttons (2/3) to adjust the settings.
Adjust these while a disc is playing to see the effect of changes immediately.
5To memorize the setting, select Memory 1, 2, 3, then press
ENTER.
The previous setting will be erased.
45