Setting the Video 1 Options

■Switching the S-Video Output Expert

You can Switch the kind of S-Video signal output from the S- Video outputs. If you connected your TV with an S-Video cord, in rare cases the TV picture may appear stretched. In this case switch the output from [S2] to [S1].

Make changes in the [S-Video Out] in the Setup screen Video 1 menu in the [Expert] menu mode (page 39).

Settings: S1

S2 (Factory Setting)

■Turning the Screen Saver On and Off Expert

As a protective function against residual images on the TV screen or monitor, a phenomenon referred to as “screen burn”, the screen saver appears when the same screen has been displayed for a length of time. By default, the screen saver is turned on. However, the screen saver function can be turned on and off at your discretion.

Make changes to the [Screen Saver] setting in the Setup screen Video 1 menu in the [Expert] menu mode (page 39).

Audio Video1 V2 Language General

TV Screen — 16:9(Wide)

S-Video Out — S2

Screen Saver

On

 

Off

Move

SETUP Exit

Settings: On (Factory setting)

Off

Note

Pressing 8 (or £ ) displays a playback screen, and pressing 8 (or

£) again resumes playback.

43