Connecting to a TV
Before connecting
•Refer also to the instruction manual of the TV.
•When you connect the DVD Player to the TV, be sure to turn off the power and unplug both units from the mains before making any connections.
•Connect the DVD Player to the TV directly. If you connect the DVD Player to a VCR, TV/VCR combination, or video selector, the playback picture may be distorted as DVD videos are copy protected.
• Connect the plugs securely. |
| Incomplete |
|
Insert completely
Using the supplied audio/video connection cable
Using the supplied audio/video cable, make audio connections from the ANALOG OUTPUT CH 1 or CH 2 L and R jacks to the corresponding audio input jacks on the TV. In the same manner, make video connection from the VIDEO OUTPUT VIDEO jack to the corresponding video input jack on the TV.
By making connections to a stereo system, you can improve the quality of the sound. Using an audio cable (not supplied), make audio connections from the ANALOG OUTPUT CH 1 or CH 2 L and R jacks to the corresponding jacks on the stereo component.
Note
Be sure to match the colors of the plugs on the cable with the corresponding jacks on the DVD Player and the TV: yellow for video, red for R (right) audio and white for L (left) audio.
: Signal flow
|
| VIDEO OUTPUT |
| ANALOG OUTPUT |
|
| VIDEO | CH 1 | CH 2 FRONT SURR CENTER |
| COMPONENT |
|
| |
Y | PB | PR | L |
|
|
| |||
|
|
| R |
|
|
| S VIDEO |
| SUB |
|
|
| WOOFER | |
BE sure to set the TV Aspect after connection using the Setup Navigator explained in “Setting Up the Player” starting on page 17 or the function setting menu explained in “Adjusting Audio and Video Settings” starting on page 42.
Stereo audio/video connection cable
To audio/video input
Video (Yellow)
L (White)
R (Red)
|
| AC INLET |
DIGITAL OUTPUT |
| DO NOT connect |
| REMOTE | |
| CONTROL | the mains lead at |
OPTICAL COAXIAL | DVD AUDIO / VODEO PLAYER | |
| MODEL NO. | this time. |
|
|
13