5Use the cursor buttons (2/3) to adjust the settings.
Adjust these while a disc is playing to see the effect of changes immediately.
6Repeat steps 4 and 5 to make adjustments to other settings.
If you would like to save the settings in the player’s memory, be sure to select either [1], [2], or [3] in the [Memory] setting to establish which memory location to save the new settings in. Please note that if you select a location where settings have already been saved, the old settings will be replaced by the new ones.
|
|
|
|
|
Memory |
| Off | 1 | 2 3 |
Move | ENTER Select | DISPLAY | Check | |
|
|
|
|
|
7When you are finished making adjustments, press ENTER to establish the new settings.
■Adjusting the picture quality settings
– To create your own setting (2)
1Use the cursor button (3) to select [Start] then press
ENTER.
Interlace Video Memory Select
Interlace Video Setup
2Use the cursor button (∞) to select [Video Setup] and press
ENTER.
3Press DISPLAY.
|
|
|
|
|
|
|
|
Fine Focus |
|
| On |
| Off | ||
Contrast | min |
|
|
|
| max | |
Sharpness | soft |
|
|
| fine | ||
Chroma Level | min |
|
|
| max | ||
|
|
|
| ||||
Hue | green |
|
|
| red | ||
Memory |
| Off | 1 | 2 3 | |||
|
|
|
|
|
|
|
|
4Use the cursor buttons (5/∞) to select the setting and use the cursor buttons (2/3) to adjust the settings.
Adjust these while a disc is playing to see the effect of changes immediately.
5To memorize the setting, select Memory 1, 2, 3, then press
ENTER.
The previous setting will be erased.
45