SLEEP
STANDBY/ ON | GRAPHIC EQ |
CLOCK | SLEEP EFFECT MODE |
PRESET |
| TUNER | INPUT | |
|
| FM | AM |
|
|
|
|
| TAPE |
|
|
| PAUSE/STEP | DVD |
REPEAT | SCROLL |
|
| M D |
PLAY MODE CLEAR | REC |
|
| |
REPEAT | RANDOM |
|
| C D |
MEMORY | CLEAR |
|
|
|
|
| DISC |
|
|
REPEAT PLAY MODE |
|
| CDR | |
TONE | CLEAR | REC |
|
|
|
|
|
| MUTING |
TIMER | 1 | 2 | 3 |
|
| 4 | 5 | 6 |
|
UP/DOWN |
|
|
|
|
| 7 | 8 | 9 | VOLUME |
|
|
| ACOUSTIC |
|
|
|
| PRESENCE |
|
ENTER | 10/0 |
|
| |
Sleep function
The Sleep function can be performed only by using remote controller.
The SLEEP timer automatically sets the entire system to Standby mode after a specified period of time.
1 Start playing something you would like to listen to.
(CD, tape, MD or radio broadcast).
2 Press the SLEEP button repeatedly to set the desired sleep time.
SLEEP
TIMER | AUTO | STEREO |
|
| MIN |
SLEEP
The time value will decrease from 90 minutes to 10 minutes in steps of 10 minutes. After a specified period of time, the unit will be automatically placed in Standby mode.
•To check the remaining time while the SLEEP function is active, press the SLEEP button.
•After CD dubbing is complete, the unit will be placed in Standby mode.
Cancelling the SLEEP setting
Press the SLEEP button repeatedly until the SLEEP indicator on the display disappears.
Notes for timer setting
•Make sure that the clock has been set cor- rectly before setting the timer.
•After setting the timer, be sure to set this unit in Standby mode. If this unit is not in Standby mode, the timer will not work.
•When the power is turned on by one of the timer mode settings, the other timer modes may not be activated at their ON time. The power will be switched off by the first timer mode at its OFF time. Set a gap of one minute or more between the OFF time and ON time for each timer set- ting. (See the figure below.)
•If you press the SLEEP button during timer play or timer recording, the power will be switched off at the SLEEP timer’s OFF time.
•If more than two timer mode settings are made at the same time, the “WEEKDAY” setting has the priority over the “WEEK- END” setting. The “REC” mode setting has no priority.
•The timer recording setting will be can- celled if the recording does not start at the ON time (for example, if the power is already on).
activate
WEEKDAY
not activate
REC
activate
WEEKEND
Time
9:00 10:00 11:00 12:00
ON OFF ON OFF
43