Audio Adjust
3. Audio Adjust Setup menu
Set the various parameters for the sound signals.
Surround L/R: This outputs the sound to the surround left and right speakers as normal and outputs nothing to the surround back speaker.
Advanced Menu
3.Audio Adjust
1.Tone Control 2.Surround Speakers 3.Sound Effect 4.Delay
5.LFE Level 6.Mono Setup
Advanced Menu
3.Audio Adjust
9.THX Setup 10.Mono Movie Setup 11.Enhanced 7 Setup 12.Orchestra Setup 13.Unplugged Setup 14.Studio Mix Setup 15.TV Logic Setup
→default
Basic Menu
3.Audio Adjust
1.Tone Control 2.Surround Speakers 3.Sound Effect
→default
Surround Back: This outputs the sound to the surround back speakers and outputs nothing to the surround left and right speakers.
Sur L/R+Back: This outputs the sound to both the surround left and right speakers and the surround back speaker.
Note:
If the Surr Back Out setting in the Speaker Config sub menu is set to “1ch,” the Surround Speakers sub menu is disabled.
Turn on and off the various sound effects.
|
| Parameter | Setting |
|
|
| Initial value |
|
|
|
|
a | On, Off | Off | |
|
|
|
|
b | Upsampling | On, Off | Off |
|
|
|
|
c | Subwoofer | On, Off | On |
| (Ana/PCM) |
|
|
|
|
|
|
d | Late Night | Off, Low, High | Off |
|
|
|
|
a)
Separately adjust the bass and treble settings as desired in
Advanced Menu
3.Audio Adjust
a.Bass | : | 0 |
b.Treble | : | 0 |
Quit:SETUP
|
| Parameter | Setting |
|
|
| Initial value |
a | Bass | 0 | |
|
|
|
|
b | Treble | 0 | |
|
|
|
|
Note:
If DIRECT or THX is selected as the listening mode, these settings cannot be made. To make these settings, first select another listening mode.
This setting allows you to decide which speakers to output to when surround back speakers are connected and you are playing back a
Parameter | Setting |
| Initial value |
a Surround Speakers Surround L/R, Surround Back, | Surround L/R |
Surr L/R + Back |
|
|
|
This can be set to either “On” or “Off.”
This parameter is enabled for listening modes other than the THX,
b) Upsampling
Upsampling processes the input digital signal, or the digital signal converted from an analog input source, and converts its digital sampling frequency to twice its current frequency for an even further detailed sound reproduction. This can be set to either “On” or “Off.” When “On” is selected, the UPSAMPLING indicator lights.
c) Subwoofer
When “Yes” is selected for the Subwoofer setting in the Speaker Config
d) Late Night
Cinema sound has a vast dynamic range; therefore, to hear the quieter sounds such as human conversations, they must be played back at larger volumes. When this parameter is set to “High” or “Low,” the dynamic range of the sound is narrowed down to allow you to easily hear minute sounds at low volumes. This function is especially useful if you wish to play a movie at low volumes during the nighttime.
This can be set to either “Off” or “Low,” or “High.”
When this parameter is set to High or Low, the dynamic range of the sound is narrowed down to allow you to easily hear minute sounds at low volume.
Off: Turns off the Late Night function.
Low: Lowers the dynamic range.
High: Narrows down the dynamic range.
Notes:
•The Late Night function is effective only on Dolby Digital encoded software.
•The depth of the Late Night effect is determined by Dolby Digital software. Some sounds may produce no or little effect.
40