OSD Setup and Other Settings

OSD Setup

This menu allows you to customize the OSD Setup Menu to display in the manner you desire.

To display the OSD Setup menu:

1.Display the main menu.

2.Use the and cursor buttons to select “5. OSD Setup” and then press the ENTER button.

The “OSD Setup” menu appears.

d. OSD Output/ c. OSD Output (TX-SR600/600E only)

Sets the OSD menu output.

VIDEO: Select this setting when the TV or projector monitor is connected to the VIDEO OUT jack.

S VIDEO: Select this setting when the TV or projector monitor is connected to the S VIDEO OUT jack.

Preference

TX-SR700/700E

TX-SR600/600E

* Menu *****************

1.Speaker Config 5.OSD Setup 2.Speaker Distance

***********************

3.Level Calibration

4.Input Setup a.Background Color

5.OSD Setup :Blue 6.Preference

b.Immediate Display :Normal

c.TV Format :Auto

Quit:SETUP

* Menu *****************

1.Speaker Config 5.OSD Setup 2.Speaker Distance

***********************

3.Level Calibration

4.Input Setup a.Background Color

5.OSD Setup :Blue 6.Preference

b.Immediate Display :Normal

c.TV Format :Auto d.OSD Output :Video

To display the Preference menu:

1.Display the main menu.

2.Use the and cursor buttons to select “6. Preference” and then press the ENTER button.

The “Preference” menu appears.

TX-SR700/700E

* Menu *****************

1.Speaker Config 6.Preference 2.Speaker Distance

***********************

3.Level Calibration

4.Input Setup

 

a.Headphones Level

5.OSD Setup

: 0dB

6.Preference

 

b.IR IN Position

 

:Main

c.AM Frequency Step

 

:9 kHz

Quit:SETUP

TX-SR600/600E

* Menu *****************

Quit:SETUP

a. Background Color

Select either Blue, Green, Magenta, or Red as the background color when the OSD Setup Menu is displayed.

b. Immediate Display

Off: Select to turn off the immediate display of operations.

Normal: Select to display operations in the bottom right corner of a TV screen with a 4:3 aspect ratio.

Wide: Select to display operations in the bottom right corner of a TV screen with a 16:9 aspect ratio.

VIDEO 1

Hint:

If this is set to “Off,” the background color will not be displayed even when there is no video signal input.

c. TV Format

(For all models other than USA and Canadian models)

The default setting is “Auto,” which means that the television format is detected and automatically set by the TX-SR700/700E/600/600E. However, if you know the correct format, you can use this setting to choose either PAL or NTSC so that no time is wasted on detection.

56

1.Speaker Config 6.Preference 2.Speaker Distance

***********************

3.Level Calibration

4.Input Setup

 

a.Headphones Level

5.OSD Setup

: 0dB

6.Preference

 

b.AM Frequency Step

 

:9 kHz

Quit:SETUP

a. Headphones Level

You can adjust the volume output from the headphones so that it matches the level output from the speakers. The headphone volume can be adjusted between –12 and +12 decibels.

b. IR IN Position (TX-SR700/700E only)

Use this setting when you have a remote control sensor connected to the IR IN terminal. The setting in this menu tells the TX-SR700/ 700E whether the remote control sensor is being used for operation of the TX-SR700/700E in the main zone or the remote zone (Zone 2).

Main: Select when you are using the remote control sensor for operation with the remote controller in the main zone.

Zone 2: Select when you are using the remote control sensor for operation with the remote controller in the remote zone (Zone 2).

c.AM Frequency Step (TX-SR700/700E)/ b. AM Frequency Step (TX-SR600/600E)

This setting only appears on the worldwide model. It determines the increment amount or decrement amount when adjusting the AM tuner frequency. The initial setting is 9 kHz, and this needs only to be changed if you are using the TX-SR700/700E/600/600E in a 10-kHz region.