6.3 To dial a number from the Phone Book:
1.With the required telephone number showing on the display, press CALL BACK button. The telephone dials out the displayed telephone number automatically in speakerphone mode.
2.The display shows the telephone number and call timer.
OR
1.Pick up the handset or press SPEAKER button (the speaker light will turn on) and wait for a dial tone.
2.Press and release CID button, 
symbol is shown.
3.Review the stored phone number by pressing 
or 
.
4.Press CALL BACK button.
6.4 Recording / Editing / Deleting voice prompt of name of phone book
With caller ID service activated, when an incoming call is received, the unit will display and announce the caller's phone number (unless it is blocked). If the caller's phone number is stored in the phone book, caller's name will be displayed too.
If the voice prompt is recorded for this phone number, the unit will announce the voice prompt instead of the caller's phone number.
1.Press and release the MENU button until the NAME RECORDING is shown.
2.Press the CALL BACK button. A list of the phone book entries will be displayed.
3.Press 
or 
to select the list you like to record a voice or name for it.
4.To record or edit the voice, hold down CALL BACK button. After the beep, speak clearly into the microphone. Release the button when you are finished (max recording time is 3 seconds.) The new voice prompt will then be replayed automatically.
To delete the voice prompt recorded, press DELETE button while the voice prompt is playing.
5.Repeat steps 3 to 4 to edit or delete entries or exit the
14
