Palsonic 76WSHDA, 86WSHDA owner manual Picture stillness, Adjusting screen aspect

Picture adjustment (continued)

Picture adjustment

Picture stillness

Press STILL button to still the current picture, press it again to restore.

Stillness

Adjusting screen aspect

1		16:9
	Press PANORAMA button.	4:3
		Panorama
2	Press CH / to select a screen	Zoom 5
	aspect ratio.
	16:9/4:3/Panorama/Zoom can be selected.

16:9 mode expands the conventional 4:3 picture into a full 16:9 picture and at the same time still maintains the height of the picture. Or view DVD program, movie in 16:9 mode.

4:3 mode leaves conventional 4:3 picture as they are, with black bars on both sides of your screen.

Note: In 4:3 display mode, when the current picture's brightness changes largely, there occurs blurry and tingling on picture's left and right sides, or when picture's upper and lower part's brightness differs greatly, there is tilt on picture's sides, these are normal phenomena, it is not necessary to worry about them.

PANORAMA mode expands the conventional 4:3 picture into a full 16:9 picture and at the same time still maintains a good aspect ratio at the centre of the screen. This will minimise distortion and produce a remarkable panoramic picture.

Zoom mode is recommended for viewing "letter-box" movie (picture with a black bar on the top and bottom) with 16:9 format. When you select this mode, you are able to fill up the whole screen. If you watch a 4:3 picture in this mode, the picture will be expanded and some information at the top and bottom will be lost.

In Zoom mode, you can pan the picture upward or downward by using VOL/ button.

21