Recording Mode
Manual Recording
Start Recording
1.Connect the system properly (see "System Connection: System Connection for Recording External Signals"), switch on the power, insert a recordable DVD+R or an
2.Press the "SOURCE" button to enter the Monitoring Mode.
3.According to the steps stated in the previous chapter (see "Monitoring Mode: the Selection of Monitoring Signals"), select the suitable input source.
The input source shall be in correspondence with the actual connection, otherwise the input source signals cannot be displayed on the monitor and the recording cannot be done, either. It is recommended to press the "SOURCE" button until the input source interface appears. If you have pressed the button more than 8 times, but the input source interface is still not available, the cause might be that the input source is not connected properly.
4.In the recording control bar menu, press the 
or 
"SELECT" button to select the option, use the 
or 
button to select the recording quality value and press the "SELECT" button to confirm.
5.In the recording control bar menu, use the 
or 
button to select the "Record" option, press "SELECT" button to enter the input mode, use the 
or 
button to select the "Record" value, and press the "SELECT" button to confirm.
The recording process starts after the above 5 steps.
Recording Process Control
button to select the "Quality" menu. Press the
Record (DVD+R)
Mode | New Title |
Source | DV |
Quality | SP |
REC TO | DVD+VIDEO |
TRICK | Record |
Title | 04/04 |
Chapter | 02 |
Time | 0:06:02/1:57:18 |
1.Use the 
or 
button to move the cursor, select the "Record" option, press the "SELECT" button to enter, use the 
or 
button to select a value, and then press the "SELECT" button.
You can select the corresponding value to complete the operations such as "RECORD", "PAUSE" and "STOP".
Record (DVD+R)
Mode | New Title |
Source | DV |
Quality | SP |
REC TO | DVD+VIDEO |
TRICK | Record |
Title | 04/04 |
Chapter | 02 |
Time | 0:06:02/1:57:18 |
STORE
PAUSE
RECORD
16
