Connections
AC cord connection and fixing, cable fixing
AC cord of this model is fixed and connected to the main unit. No AC cord needs to be connected.
–How to Unfasten the AC cord
Loosen the fixing band securing the AC cord.
To loosen:
Push the catch
Pull
–Cable fixing bands
Secure any excess cables with bands as required.
Note:
Two fixing bands are supplied with this unit. In case of securing cables at three positions, please purchase it separately.
Pass the attached cable fixing band through the clip as shown in the figure.
1
To secure cables connected to Terminals, wrap the cable fixing band around them then pass the pointed end through the locking block, as shown in the figure.
While ensuring there is sufficient slack in cables to minimize stress (especially in the power cord), firmly bind all cables with the supplied fixing band.
To tighten: | To loosen: |
| Push the catch |
Pull |
|
2 | Pull |
11