PICTURE Adjustments

● 3:2

When “ON”, the display attempts to reproduce a more natural

 

PULLDOWN

interpretation of sources such as movie pictures, which are

OFF

 

recorded at 24 frames per second.

 

If the picture is not stable, turn the setting to “OFF”.

 

Note:

When “ON”, this setting only affects the following signal input:

•525i (480i), 625i (575i), 1125 (1080) / 60i signal input during “COMPONENT” input signal.

●STUDIO GAIN Sharpens the contrast for a better view when a part of the image

is too light to see.

OFF

OFF: Disables “STUDIO GAIN”.

ON: Enables “STUDIO GAIN”.

ON

ON

Notes:

•“STUDIO GAIN” can be modified when “Studio mode” in the OPTIONS menu is “On”. When “Studio mode” is “Off”, this setting is “OFF” and cannot be changed. (see page 56)

•This setting is valid only when the input signals are as follows: Component Video, RGB (analog), SDI, HDMI

● NOISE REDUCTION Sets the following three NR (Noise Reduction) functions together.

VIDEO NR, BLOCK NR, MOSQUITO NR

OFF MIN

ADVANCED MAX MID

[Advanced NR]

Sets the three NR functions separately.

1

2

Select “ADVANCED”.

NOISE REDUCTION

ADVANCED

 

 

VIDEO NR

OFF

 

 

BLOCK NR

OFF

 

 

MOSQUITO NR

OFF

Select the item and set.

NOISE REDUCTION

ADVANCED

 

 

VIDEO NR

OFF

 

 

BLOCK NR

OFF

 

 

MOSQUITO NR

OFF

select

OFF MIN

2 set

MAX

MID

1 select

VIDEO NR: Automatically reduces unwanted picture noise.

BLOCK NR: Reduces block noise when playing MPEG videos.

MOSQUITO NR: Reduces mosquito noise around subtitles on MPEG videos.

Note:

“NOISE REDUCTION” cannot be adjusted while a PC signal is being applied.

Helpful Hint ( NORMALIZE Normalization)

On the remote control unit, while the “ADVANCED SETTINGS” menu is displayed, if the OK button is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings.

34