|
|
| OPTIONS Adjustments | |
|
|
|
|
|
Item |
| Adjustments | ||
| Set the infrared transmitter for the 3D Eyewear. |
|
| |
3D Emitter | INT: Use the infrared transmitter of the unit. |
|
| |
| EXT: Use the external 3D IR TRANSMITTER (available separately.) | |||
| Set the function to operate when the FUNCTION button 1 to 2 on the remote control is pressed. | |||
| 3D settings: The “3D SETTINGS” menu is displayed. |
|
| |
Function button assign 1 | Scrolling bar: The screen saver activates, and after 15 minutes, the display power shuts down (standby). | |||
Function button assign 2 | Test patterns: The test pattern is displayed by switching among seven patterns. | |||
| Blue only: The screen displays only blue color for image adjustment. | |||
| Signal: The “SIGNAL” menu is displayed. |
|
| |
| 3D Safety Precautions show/hide is set during power ON. | |||
| On: 3D Safety Precaution is shown every time when the power is ON. | |||
| Off: 3D Safety Precaution is not shown when the power is ON. | |||
| When the setting changes from “On” to “Off”, the confirmation screen is displayed as below. Pressing | |||
3D Safety Precautions | “YES” switches the setting. |
|
| |
|
|
|
| |
| 3D Safety Precautions |
|
| |
|
|
|
| |
|
| If Off is selected, the 3D safety precautions |
| |
|
| will not be displayed when power is turned on. |
| |
|
| Change Setting? |
|
|
|
| YES | NO |
|
|
|
|
|
|
|
|
|
|
|
Memory lock | Locks or unlocks saved profiles. Also for setting passwords. (see page 41) |
Using FUNCTION button
Pressing the FUNCTION button activates one of the following five functions. The settings of functions are performed with the “Function button assign 1” and “Function button assign 2” on the OPTIONS menu. (see above) The factory preset functions are as described below.
FUNCTION 1 Button: 3D SETTINGS
FUNCTION 2 Button: SIGNAL
3D SETTINGS / SIGNAL
The “3D SETTINGS” menu is displayed. (Example: 3D SETTINGS)
3D SETTINGS |
|
| |
| 3D EYEWEAR | ON |
|
| 3D INPUT FORMAT | AUTO |
|
| LEFT/RIGHT SWAP | OFF |
|
| SAFETY PRECAUTIONS |
|
|
Pressing the FUNCTION button clears the menu.
SCROLLING BAR / TEST PATTERNS / BLUE ONLY
Confirmation screen (Example: SCROLLING BAR)
FUNCTION 1
SCROLLING BAR
YES | N O |
Press to |
|
select | The operation starts. |
“YES”. | |
Press. |
|
SCROLLING BAR | TEST PATTERNS |
|
|
|
|
| |||||||||||
Activates the SCROLLING BAR ONLY screensaver. |
|
|
|
|
| ||||||||||||
Each time you press , a different test pattern is displayed (seven in all). | |||||||||||||||||
After 15 minutes, the display enters standby mode. | |||||||||||||||||
| Color Bars | Red | Green | ||||||||||||||
|
| ||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
To exit this mode, press any button.
BLUE ONLY
The screen displays only blue color for image adjustment. To exit this mode, press FUNCTION button.
Note:
Black |
|
|
|
|
|
|
| Frame | Blue | ||
|
| 1% window (2 lines × 2 dots) | |||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
To exit this mode, press any button other than .
PC POWER MANAGEMENT and AUTO POWER OFF are deactivated during SCROLLING BAR or TEST PATTERNS operation. (see page 46)
57