Getting to Know Your Machine
Connecting the Cable
Getting to Know Your Machine
Telephone Line Jack
•Plug one end of the telephone line cable into the telephone jack supplied by the telephone company and the other end into the LINE jack on the left side of the machine.
(Refer to Setting the Dialling Method. See page 160.)
External Telephone Jack
•You can connect an additional standard single line telephone to the machine. To connect the telephone, remove the protective tab on the TEL jack.
Telephone Jack
LINK Lamp
Illuminates when connected to the LAN. Lamp will not turn ON if LAN cable is defective (contains breaks).
LAN Connection Jack
LAN Cable
Insert the plug until a click is heard.
(LAN cable is not included with the product.) Purchase a Category 5 Cable, compliant with EIA/TIA
10/100BASE-
TX LINK
RX
ACTIVITY Lamp
Blinks when there is data traffic on the LAN.
Ethernet LAN Cable
Power Switch
•After connecting all cables and the Power Cord, turn the Main Power Switch on the Back, and the Power Switch on the Left Side of the machine to the ON position.
9