– 48 –
Servo reference
EXT

This unit automatically selects the input video signal selected by the INPUT switch, the

reference video signal supplied from the REF VIDEO input connector or the internal sync

signal as the servo reference signal.

When the signal is selected, the unit's mode and servo reference stand in the relationship

shown in the flowchart presented below.

1
2
What is the SERVO REF on the setup
menu No. 304 setting?
3Is the unit in the editing mode?
(Is VIDEO, CH1, CH2, CUE or TC
selected?)
4Is the REF VIDEO signal supplied?
YES
YES
Is the unit in the recording mode?
AUTO
YES
NO
NO
NO
NO
YES
Is the input video signal
available?
The REF VIDEO input
signal serves as the
reference signal.
The internal sync signal
serves as the reference
signal.
The input video signal
serves as the reference
signal.

Applicable only to AJ-D450.