Specifications
VTR Section
VTR Video System (during playback on a standard playback unit)
Bands: | Y; 30 Hz to 5.75 MHz o1.0 dB/p3.0 dB |
S/N ratio: | 55 dB |
K factor (2T pulse): | Within 2% |
Y/C delay: | Within 30ns |
VTR Audio System (during playback on a standard playback unit)
Sampling frequency: | 48 kHz (synchronized to video) |
Quantization: | 16 bits |
Frequency response: | 20 Hz to 20 kHzt1.0 dB (at reference level with OFF setting |
| for MIC LOWCUT on setting menu) |
Dynamic range: | 85 dB or more (at 1 kHz, AWTD) |
Distortion: | Within 0.1% (at 1 kHz, reference level) |
Wow & flutter: | Below measurable limit |
Head room: | 20 dB |
Emphasis: | T1r50 ¯s, T2r15 ¯s (can be turned ON/OFF) |
VTR Tape Travel System | |
Tape used: | DVCPRO format |
Tape speed: | 33.820 mm/sec |
Recording/playback time: | Approx. 66 min. (using |
FF/REW time: | Approx. 3 min. (using |
Connectors |
|
Input |
|
AUDIO IN CH1/CH2 |
|
(XLR·2, 3 pins, female): | MIC/LINE switchable, balanced, more than 10 kilohms |
| MIC; Menu setting to p60, p50, p40 dBu |
| LINE; Menu setting to p6, 0, o4 dBu |
MIC IN (XLR, 3 pins, female): | Phantom o48 V, balanced, 3 kilohms, Menu setting to |
p60, p50, p40 dBu
GENLOCK IN/(VIDEO IN) (BNC):
1.0
TIME CODE IN (BNC):0.5 V to 18
Output
CAMERA OUT (BNC): | 1.0 | |
VIDEO OUT (BNC): | 1.0 | |
AUDIO OUT |
|
|
(XLR, 3 pins, male): | o4 dBu, balanced, low impedance CH1, CH2 or MIX | |
| selectable | |
TIME CODE OUT (BNC): | 1.5 | |
PHONES (stereo mini jack) |
|
|
Other
DC IN (XLR, 4 pins, male): | DC 12 V |
DC OUT (4 pins, female): | DC 11 V to 17 V, maximam rated current; 0.1 A |
LENS (12 pins) |
|
ECU (6 pins) |
|
Accessories
Shoulder strap (q1), Battery connector (including screws) for supporting Sony battery, AUDIO LEVEL CH1 control knob (including screw) (q1), Holder for an Anton Bauer battery (already mounted on main unit), Tripod mount adaptor (q1), Microphone (with holder) (q1)
– 156 –