Using the Sony BP-90 Battery Pack

1 Mount the accessory battery mounting connector. (See the preceding page.)

2 Mount the BP-90 battery case.

ATighten the mounting screws.

BTichten the power supply contact screws.

CInsert the top of the detached cover in the direction of the arrow.

DAlign the hole at the bottom (metal part) of the cover with the bottom of the case and mount the cover to the battery mounting connector with the screw.

Using the Sony BP-L60/BP-L90 lithium-ion Battery Pack

1 Attach the supplied battery mounting terminals.

2 Attach the lithium-ion battery holder.

AAs shown in the figure, remove the battery clamp, and attach the holder using the

mounting screws.

BTighten the power supply contact screws. C Put the battery clamp back into place.

Notes{

ÁThe unit’s power must be set to OFF before the plug is inserted or removed.

ÁTake care when attaching the battery case/battery holder that the wires are not pinched.

– 27 –