Status Displays Inside the Viewfinder Screen
In addition to images, messages indicating the unit’s settings and operating status appear on the viewfinder screen. The center marker and safety zone marker, etc. are also displayed.
When the MENU SET/OFF switch is set to OFF, items set to SET at the VF DISPLAY page of the setting menu and using related switches appear at the top and bottom of the screen. Messages informing of the setting contents or of the adjustment course or results can also be displayed for approximately 3 seconds when settings are changed, during the course of adjust- ments, or after adjustments have been completed.
ÁSee “Selecting Display Items” (page 56) for selecting display items, “Display Mode and Setting Change Message” (page 57) for the setting change message, and “Setting the Marker Displays” (page 58) for the marker displays.
The display positions of all items which can be displayed are shown in the figure below.
1.Extender display
2.Shutter speed/mode display
3.Remaining tape length display
4.Remaining battery level display
5.Filter display
6.White balance memory display
7.Gain value display
8.Audio level display
9.Iris value display
10.Warning display
11.Safety zone marker
12.Center marker
13.Super iris ON display
14.MARK1/MARK2 display
15.TCG (Time Code Generator) display
1 2 q 3 s 4
|
|
|
|
|
|
|
|
|
|
|
|
|
o | EX OFF | S |
| 14.6V | ||||||||
|
|
|
|
|
|
|
|
|
|
| o | |
|
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| p |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| n |
|
|
|
|
|
|
|
|
|
|
|
|
| M1 |
| ||
o |
|
|
|
|
|
|
|
|
|
|
|
|
| r | ||
|
|
|
|
|
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
| ||||||||
| A1 | A | 0dB | - - - - - - - | F5.6 | o | ||||||||||
|
| |||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
| ||||
5 | 6 | 7 | 8 | 9 |
|
| ||||||||||
– 53 –