Adjusting the Time and Date
Adjustment and setup using the setting menu
1.Hold down the SHIFT/ITEM and UP buttons and set the MENU SET/OFF switch to SET. The unit switches to ENG mode.
The page on which the previous setting menu operations were completed appears on the viewfinder screen.
(When the menu is used for the first time, the first page appears.)
2.Press the PAGE button until the TIME/DATE page shown below appears. (This operation can also be performed using the PAGEoUP/DOWN function.)
- T I ME / DATE -
YEAR | : 9 8 |
¢ |
|
MONTH | : 0 1 |
DAY | : 0 1 |
HOUR | : 0 0 |
M I NUTE : 0 0
ÇT I ME / DATE SE T
3.Press the SHIFT/ITEM button to select the item to be changed.
4.Press the UP (or DOWN) button to change the setting value.
The number is incremented by o1 each time the UP button is pressed and decremented by p1 each time the DOWN button is pressed.
- T I ME / DATE -
YEAR | : 9 8 |
MONTH | : 0 1 |
DAY | : 0 1 |
HOUR | : 0 0 |
¢M I NUTE : 0 0
ÇT I ME / DATE SE T
5.When the settings have been completed, press the SHIFT/ITEM button to select TIME/DATE SET and then press the UP (or DOWN) button. The time starts from when the button is pressed.
ÇT I ME / DATE SE T
6.When menu operations have been completed, set the MENU SET/OFF switch to OFF.
The setting menu disappears from the viewfinder screen and the displays indicating the unit’s current status appear at the top and bottom of the viewfinder screen.
Note{
The seconds cannot be set and always start from 0 seconds.
– 62 –