Adjusting the White Balance/Black Balance
4 Adjustment is completed after a few seconds (the following message appears) and the adjustment value is automatically stored in the memory.
ABB OK
Message after adjustment is completed
Notes{
ÁCheck that the lens connector is connected and that the iris of the lens is set to CLOSE. ÁDuring black balance adjustment, the iris automatically goes to the shaded status. ÁDuring black balance adjustment, the gain selector circuit switches automatically.
In addition, flicker and noise may appear on the viewfinder screen, but this does not indicate a malfunction.
ÁThe black balance cannot be adjusted while the setting menu is displayed on the viewfinder screen. Therefore, be sure to set the MENU SET/OFF switch to OFF.
ÁIf black shading is not satisfactory even when ABB is OK, open the AUTO SHADING page of the setting menu and execute black shading adjustment. (See page 124.)
– 70 –