Setup Menus
AUDIO
| Item |
| Setting |
|
|
|
|
|
|
| Description of setting |
No. | Superimposed | No. | Superimposed |
| |
|
| ||||
display | display |
|
| ||
|
|
|
| ||
|
|
|
|
| |
|
|
|
|
| |
780 | AUD OUT SEL |
|
| For setting the output sound of the analog audio output connectors. | |
|
| 0000 | LINE | 0: All the output connectors are used as the main line output. | |
|
|
|
|
| CH1 connector = CH1 sound |
|
|
|
|
| CH2 connector = CH2 sound |
|
|
|
|
| CH3 connector = CH3 sound |
|
|
|
|
| CH4 connector = CH4 sound |
|
| 0001 | CH1/2 | 1: The CH1 and CH2 output connectors are used as the main line output, | |
|
|
|
|
| and the CH3 and CH4 output connectors are used as the monitor output |
|
|
|
|
| connectors. |
|
|
|
|
| CH1 connector = CH1 sound |
|
|
|
|
| CH2 connector = CH2 sound |
|
|
|
|
| CH3 connector = Monitor L (CH1, CH2, CH1+CH2) sound |
|
|
|
|
| CH4 connector = Monitor R (CH1, CH2, CH1+CH2) sound |
|
| 0002 | CH3/4 | 2: The CH1 and CH2 output connectors are used as the main line output, | |
|
|
|
|
| and the CH3 and CH4 output connectors are used as the monitor output |
|
|
|
|
| connectors. |
|
|
|
|
| CH1 connector = CH3 sound |
|
|
|
|
| CH2 connector = CH4 sound |
|
|
|
|
| CH3 connector = Monitor L (CH3, CH4, CH3+CH4) sound |
|
|
|
|
| CH4 connector = Monitor R (CH3, CH4, CH3+CH4) sound |
|
|
|
|
| |
781 | IN IMP SEL |
|
| For setting the impedance of the analog audio input. | |
|
| 0000 | 600 | 0: | 600 Ω |
|
| 0001 | HIGH | 1: High impedance | |
|
|
|
| <Note> | |
|
|
|
| Regardless of the setting selected here, the impedance is set to 3 kΩ when | |
|
|
|
| ||
|
|
|
| IN LV) settings. | |
|
|
|
|
|
|
The underlining denotes the factory mode.
MENU
| Item |
| Setting |
| |
|
|
|
| Description of setting | |
No. | Superimposed | No. | Superimposed | ||
| |||||
display | display |
| |||
|
|
| |||
|
|
|
|
| |
|
|
|
|
| |
A02 | P.ON LOAD |
|
| For setting whether to change the setup menu settings to the user’s initial | |
|
|
|
| settings when the power is turned on. | |
|
| 0000 | OFF | 0: The settings are not changed. | |
|
| 0001 | ON | 1: The settings are changed. | |
|
|
|
|
|
The underlining denotes the factory mode.
35