Operations using the front panel top controls

VTR status item table

Name of registration

Item as it ap-

 

 

pears on VTR

 

Description of display

 

menu item

 

 

status display

 

 

 

 

 

 

 

000

 

REC FORMAT

REC FMT

This indicates the recording format.

 

 

 

 

1080i:

The tape is recorded using the 1080i format.

 

 

 

 

 

001

 

REF OUT

REFOUT

This displays the output reference status.

 

 

 

 

HD_59:

The HD REF input signal has been selected as

 

 

 

 

 

the reference. The field frequency is 59.94 Hz.

 

 

 

 

HD_60:

The HD REF input signal has been selected as

 

 

 

 

 

the reference. The field frequency is 60 Hz.

 

 

 

 

IN_59:

The HD serial input signal has been selected

 

 

 

 

 

as the reference. The field frequency is 59.94

 

 

 

 

 

Hz.

 

 

 

 

IN_60:

The HD serial input signal has been selected

 

 

 

 

 

as the reference. The field frequency is 60 Hz.

 

 

 

 

INT59:

The signal from the internal generator (59.94

 

 

 

 

 

Hz) is selected as the reference.

 

 

 

 

INT60:

The signal from the internal generator (60 Hz)

 

 

 

 

 

is selected as the reference.

 

 

 

 

INTSC59: The SD REF input signal has been selected as

 

 

 

 

 

the reference. The field frequency is 59.94 Hz.

 

 

 

 

INT59N:

SD REF has been selected by the OUT REF

 

 

 

 

 

setting. Since the SD REF signal is not input,

 

 

 

 

 

the signal from the internal generator (59.94

 

 

 

 

 

Hz) is used.

 

 

 

 

 

002

 

PB FLD RATE

PB_FLD

This indicates the field frequency at which the recording

 

 

 

 

was made on the tape as ascertained from the tape’s

 

 

 

 

playback signals.

 

 

 

 

59.94:

The tape has been recorded at a field fre-

 

 

 

 

 

quency of 59.94 Hz.

 

 

 

 

60:

The tape has been recorded with at a field fre-

 

 

 

 

 

quency of 60 Hz.

 

 

 

 

 

003

 

REC FLD

RECFLD

This indicates the field frequency at which the recording

 

 

RATE

 

is to be made on the tape.

 

 

 

 

59.94:

The recording will be made on the tape at a

 

 

 

 

 

field frequency of 59.94 Hz.

 

 

 

 

60:

The recording will be made on the tape at a

 

 

 

 

 

field frequency of 60 Hz.

 

 

 

 

 

004

 

HD OUT

HD_OUT

This indicates the format of the HD serial output.

 

 

 

 

1080i:

The HD serial output uses the 1080i format.

 

 

 

 

 

005

 

SD OUT

SD_OUT

This indicates the format of the SD output.

 

 

 

 

422i:

The SD output is in the 422i format.

 

 

 

 

411i:

The SD output is in the 411i format.

 

 

 

 

DV:

The SD output is in the DV format.

 

 

 

 

DVCAM: The SD output is in the DVCAM format.

 

 

 

 

 

006

 

UFC

UFC

This indicates the status of HD-SD format converter

 

 

 

 

board (AJ-UDC150P, sold separately).

 

 

 

 

LN_CON: The line converter is operating.

 

 

 

 

IP_CON: The ip converter is operating.

 

 

 

 

UP_CON: The up-converter is operating.

 

 

 

 

DW_CON: The down-converter is operating.

 

 

 

 

NON:

HD-SD format converter board (AJ-UDC150P,

 

 

 

 

 

sold separately) is not installed.

 

 

 

 

 

 

– 23 –