Panasonic AJ-SD930P, AJ-SD955AP manual 35

Setup menus

USER menu		<BASIC>
No./Item			Description
009	This sets the position of the characters on the
	horizontal plane for the time code and other
CHARA H-POS	super displays output to the VIDEO OUT 3/
	SDI OUT 3 connector.
	0000	0
	:	:
	0004	4
	:	:
	0016	16
	<Note>
	When setting this item, the DISPLAY SEL status
	is output to VIDEO OUT 3/SDI OUT 3 even if
	SUPER OFF has been set. However, when the
	menu is exited, operation complies with the
	SUPER OFF/ON setting.
	Also, CHARA TYPE is output to VIDEO OUT
	3/SDI OUT 3 according to the status set in the
	menu.
010	This sets the position of the characters on the
	vertical plane for the time code and other
CHARA V-POS	super displays output to the VIDEO OUT 3/
	SDI OUT 3 connector.
	[525i system]		[625i system]
				SD955A
	0000	0	0000		0
	:	:	:		:
	0018	18	0023		23
	:	:	:		:
	0022	22	0028		28
	<Notes>
	OWhen setting this item, the DISPLAY SEL
	status is output to VIDEO OUT 3/SDI OUT 3
	even if SUPER OFF has been set. However,
	when the menu is exited, operation complies
	with the SUPER OFF/ON setting.
	OWhen the DISPLAY SEL setting causes
	characters to extend beyond the edges of the
	screen, the setting value is changed so that the
	characters are automatically displayed in a
	position on the screen.
011	This selects the display type for the super
	display output to the VIDEO OUT 3/SDI OUT 3
CHARA TYPE	connector as well as for displays such as the
	setting menu, etc.
	0000	WHITE : White characters against a black
			background.
	0001	W/OUT : White			characters with a black
			border.
012	This sets the VTR’s recording and playback
	format.
SYS FORMAT
	0000	50M	:
	DVCPRO50 (50 Mbps) is selected.
	0001	25M	:
	DVCPRO (25 Mbps) is selected.
	<Note>
	The format complies with the setting of this menu
	item when the tape is ejected.

The underlined items indicates the initial setting.

No./Item			Description
013		This sets the format in which the tape is to be
		played back.
PB FORMAT
		0000 MANUAL :
		The format complies with the setting of setup
		menu No. 012 (SYS FORMAT) when a
		DVCPRO cassette is inserted.
		The format complies to the format recorded on
		the tape when a DV or DVCAM cassette is
		inserted.
		0001	AUTO :
		The format complies with the format recorded
		on the tape.
		<Notes>
		OWhen an editing mode has been selected, the
		“MANUAL” setting is forcibly established for
		internal operations.
		OWhen AUTO has been selected, the picture
		and sound may be disturbed until the format is
		detected after a tape is loaded.
015		This sets whether the recorder is to be
	SD955A
		forcibly set to the EE mode and the player’s
MONI		playback signals are to be output to the
CONTROL		monitor by pressing the recorder’s PLAYER
		button when a monitor has been connected
		only to the recorder during deck-to-deck
		editing.
		0000	MANU :
		The recorder is not forcibly set to the EE mode.
		0001	AUTO :
		The recorder is forcibly set to the EE mode,
		and the player’s playback signals are output.
017		This selects the size of the characters for the
		superimposed display output from the VIDEO
CHARA SIZE		OUT 3 or SDI OUT 3 connector.
		0000 NORMAL : Standard size
		0001 LARGE : 4 times larger than the standard
			size
		<Note>
		When LARGE has been selected, only time data
		is displayed, regardless of the setup menu
		No.008 (DISPLAY SEL) setting.
070		This selects the TV system.
	SD955A
TV SYSTEM		0000	525 : The 525 interlace/59.94 Hz
			system is selected.
		0001	625 : The 625 interlace/50 Hz system
			is selected.
		<Note>
		After this setting is changed, turn off and back on
		the power again to take it effect.

35