Audio V fade function
When editing tapes, the edit point splicing selection (setup menu No. 311 and 312) information is recorded on the tape. This information is then sensed during playback, and V fade or cut processing is automatically performed for these sections.
However, only when the playback fade selection (No. 727) is AUTO.
When the edit point splicing selection (setup menu No. 311 and 312) is CUT
Audio signal A | Audio signal B |
|
|
Noise appears at the edit splice.
When the edit point splicing selection (setup menu No. 311 and 312) is FADE
Audio signal A | Audio signal B |
V fade is performed instantaneously to eliminate the noise.
<Notes>
OWhen the playback fade selection (No. 727) is CUT, cut processing is performed for all splices.
OWhen the playback fade selection (No. 727) is FADE, V fade processing is performed for all splices.
60