35
Setup menus
1Press the (SHIFT+RECORDER).
MENU
2When the FF button is pressed while holding down
the SHIFT button, the next user file is selected;
conversely, when the REW button is pressed while
holding down the SHIFT button, the previous user
file is selected.
3To enter the selection made in step 2for the user
file which is to be used, press the SET button.
The user file is changed and stored in the memory.
This VTR can hold five user files, each of which has its
own specific menu settings, and one of these files can
be selected for use.
Changing the file
1Press the (SHIFT+RECORDER).
MENU
2Press the REW button or FF button while holding
down the SHIFT button to select the file for which
the lock mode is to be set or released.
3Turn the search dial to move the cursor (2) on the
menu screen to No. 30 (MENU LOCK) for the
system file or to No. A03 (MENU LOCK) for a user
file.
4Turn the search dial while holding down the search
button to select whether the lock mode is to be set
or released.
To set the lock mode:
Set 0001 (ON) as the setting.
To release the lock mode:
Set 0000 (OFF) as the setting.
When the lock mode has been set, “LOCKED”
flashes on the menu screen. The counter display
stops flashing and remains lit.
5Press the SET button.
The setting is stored in the memory.
The lock mode can be set to protect the system file
and user file (USER2 to USER5) settings. Once the
lock mode is set, no further changes can be made to
the settings.
Setting and releasing the lock mode can be set for the
system file by using setup menu No. 30 (MENU LOCK)
and for the user files by using setup menu No. A03
(MENU LOCK).
Setting and releasing the lock mode
SYSTEM
FF REW
USER 1
FF REW
USER 2
FF REW
USER 3
FF REW
USER 4
FF REW
USER 5
FFREW
User files
Each user file contains the
following items.
OBASIC
OOPERATION
OINTERFACE
OEDIT
OTAPE PROTECT
OTIME CODE
OVIDEO
OAUDIO
OV BLANK
OMENU
<Note>
Since the SYSTEM menu items are not included in
user files 1 through 5, first select the user file and
switch to the SYSTEM file, and then set the SYSTEM
menu items.
<Notes>
OThe lock mode cannot be set for the USER1 file.
OOnce set to the lock mode, a file cannot be reset to
the factory settings even by pressing the RESET
button.
SETUP-MENU LOCKED
<USER2> NO.000-0005
2
000 P-ROLL TIME 5s
001 LOCAL ENA ST&EJ
002 TAPE TIMER ±12h
003 REMAIN SEL OFF
004 SETUP NUMBER OFF
005 METER SELECT CUE
006 SYNCHRONIZE ON
007 SUPER ON
008 DISPLAY SEL T&STA