59
Setup menus (continued)
The underlined items indicates the initial setting.
USER menu <V BLANK>
No./Item Description No./Item Description
Sub-screen
801
ADD LINE 50
00
REC LINE1
Sub-screen
For selecting the mode for recording signals
on additional lines.
0000 OFF
:No signals are recorded on
additional lines.
0001 YC422
:The 422 mode signals are
recorded on 2 lines.
0002 Y4_B/W
:Only the Y signal is recorded on
4 lines directly.
0003 Y4_BPF
:Only the Y signal is recorded on
4 lines after it has been
separated from the C signal.
0004 C4
:Only the C signal is recorded on
4 lines.
<Notes>
OWhen a setting from “0001 (YC422)” to “0004
(C4)” is selected and the STOP button is
pressed, operation transfers to the sub-
screen, and the recording lines can be
selected.
To return from the sub-screen, press the
STOP button again.
OThe setting takes effect when the system
format is 50 Mbps.
For selecting the additional line where the
signals are to be recorded.
[625i system] [525i system]
0000 7L 0000 10L
::::
0015 22L 0012 22L
0016 320L 0013 263L
: : 0014 273L
0031 335L : :
0032 623L 0025 284L
0026 525L
01
REC LINE2
For selecting the additional line where the
signals are to be recorded.
[625i system] [525i system]
0000 7L 0000 10L
::::
0015 22L 0012 22L
0016 320L 0013 263L
: : 0014 273L
0018 322L ::
: : 0016 275L
0031 335L : :
0032 623L 0025 284L
0026 525L
02
REC LINE3
For selecting the additional line where the
signals are to be recorded.
[625i system] [525i system]
0000 7L 0000 10L
::::
0003 10L 0003 13L
::::
0015 22L 0012 22L
0016 320L 0013 263L
: : 0014 273L
0031 335L : :
0032 623L 0025 284L
0026 525L
<Note>
This menu item is not displayed when setting “1”
has been selected as the additional line mode.
03
REC LINE4
For selecting the additional line where the
signals are to be recorded.
[625i system] [525i system]
0000 7L 0000 10L
::::
0015 22L 0012 22L
0016 320L 0013 263L
: : 0014 273L
0019 323L ::
: : 0017 276L
0031 335L : :
0032 623L 0025 284L
0026 525L
<Note>
This menu item is not displayed when setting “1”
has been selected as the additional line mode.
802
TELETEXT SEL
For selecting the type of teletext signals to
be recorded.
0000 MOJI
:MOJI system
0001 NABTS
:NABTS system
<Notes>
OThis setup menu is not displayed in the 625i
system.
OVITC signals are often mistakenly detected as
teletext signals when the NABTS system has
been selected.
If this happens, select MANU as the setting for
setup menu No. 803 (TELETEXT DET), then
select the line for teletext signals.