64
Display position
The position of the characters superimposed on the
display can be changed using setup menus No. 009
(CHARA H-POS) and No. 010 (CHARA V-POS).
Superimpose screen
The control signals, time code, etc. are displayed using
abbreviations. Characters displayed
The background of characters superimposed on the
display can be changed using setup menu No. 011
(CHARA TYPE).
TCR 22: 22 : 22 : 22
TV monitor
TTCCRR 2222:: 2222:: 2222:: 2222
TV monitor
TCR 22: 22 : 22 : 22
TV monitor
TCR 22: 22 : 22 : 22
TV monitor
TCR 22: 22 : 22 : 22
TV monitor
Abbreviations:
CTL : Control signal count value
TCR :Time code data recorded in the SBC area
TCR. : Time code data recorded in the VAUX area
UBR : User bit data recorded in the SBC area
UBR. : User bit data recorded in the VAUX area
TCG :Time code data of the time code generator
UBG : User bit data of the time code generator
<Note>
[T2R], [T2R.], [U2R] or [U2R.] is displayed when
the data has not been read correctly from the tape.
Operation mode
The VTR’s operation mode can also be displayed
using setup menu No. 008 (DISPLAY SEL).
TCR 22: 22 : 22 : 22
STOP
TV monitor
VTR operation mode