Panasonic AK-HRP200G HD DTL/SKIN DTL (2/2), SD DETAIL, →＊＊ ＳＤ ＤＥＴＡＩＬ ＊＊, ＤＥＴＡＩＬ ＳＷＩＴＣＨ, ＤＥＰＥＮＤＥＮＴ, ＤＥＴＡＩＬ

ROP menu setting  (continued)

Item	Display	Function
+GAIN	-31	Changes the detail gain level in
	׀	+ (up) direction
	0
	׀
	31
-GAIN	-31	Changes the detail gain level in -
	׀	(down) direction
	0
	׀
	31

HD DTL/SKIN DTL (2/2)

→＊＊ ＨＤ ＤＴＬ／ＳＫＩＮ ＤＴＬ（ ２／２ ） ＊＊

ＳＫＩＮ ＤＥＴＡＩＬ				ＳＷＩＴＣＨ				ＯＦＦ
ＣＵＲＳＯＲ				ＯＮ／ＯＦＦ			Ｈ	Ｖ
						ＯＦＦ	９６０	２７０
ＳＫＩＮ ＧＥＴ								ＮＯ�
ＭＥＭＯＲＹ ＳＥＬＥＣＴ								Ａ
	ＣＲＩＳＰ		ＰＨＡＳＥ				ＷＩＤＴＨ	ＳＡＴＵ
	Ａ	０		０			０	０
	Ｂ	０		０			０	０
ＺＥＢＲＡ		ＳＷＩＴＣＨ						ＯＦＦ
ＥＦＦＥＣＴ ＭＥＭＯＲＹ								Ａ＋Ｂ
				(		indicates factory default settings.)
Item		Display						Function
SKIN DETAIL				OFF		Enables or disables control of
SWITCH				ON		skin tone detail in HDTV video
						output.
CURSOR				OFF		Enables or disables the position
				ON		cursor that obtains the saturation
						and color phase information for
						controlling skin tone detail.
POS H				1		Sets horizontal cursor position.
					׀
				960
					׀
				1920
POS V				1		Sets vertical cursor position.
					׀
				270
				540
SKIN GET				NO?		Automatically obtains the
		EXECUTE				saturation and color phase
		CANCEL				information from the cursor
						position.
						NO?:
						Cancels operation.
						EXECUTE:
						Automatically obtains
						saturation and color phase
						information from the cursor
						position.
						CANCEL:
						Discards the saturation and
						color phase information
						obtained from the cursor
						position.
MEMORY					A	Changes memory locations
SELECT					B	for saving the skin tone detail
						settings (CRISP, PHASE,
						WIDTH and SATURATION).
MEM A CRISP				-63		Removes very faint noise
					׀	components from detail
				0		components in skin tone areas
					׀	in memory bank A.
				63
MEM A PHASE				0		Changes the color phase of skin
					׀	tone areas in memory bank A
				359		in a range from 0 to 359 on a
						vector display.

Item	Display	Function
MEM A WIDTH	0	Expands the width of skin tone
	׀	areas in memory bank A in a
	255	range from 0 to 255.
MEM A SATU	0	Changes the saturation of skin
	׀	tone areas in memory bank A in
	255	a range of 0 to 255.
MEM B CRISP	-63	Removes very faint noise
	׀	components from detail
	0	components in skin tone areas
	׀	in memory bank B.
	63
MEM B PHASE	0	Changes the color phase of skin
	׀	tone areas in memory bank B in
	359	a range of 0 to 359 on a vector
		display.
MEM B WIDTH	0	Expands the width of skin tone
	׀	areas in memory bank B in a
	255	range from 0 to 255.
MEM B SATU	0	Changes the saturation of skin
	׀	tone areas in memory bank B in
	255	a range from 0 to 255.
ZEBRA SWITCH	OFF	Adds a zebra pattern to the
	A	Y signals of the PM output to
	B	make areas subject to skin tone
	A+B	detail effects easily visible.
EFFECT	A	Selects the memory bank to
MEMORY	B	which skin tone detail effects will
	A+B	be added.

SD DETAIL

→＊＊ ＳＤ ＤＥＴＡＩＬ ＊＊

ＤＥＴＡＩＬ ＳＷＩＴＣＨ		ＯＮ
Ｖ ＤＥＴＡＩＬ		３
Ｈ ＤＥＴＡＩＬ		５
ＣＲＩＳＰ		０
ＰＥＡＫ１		３．１７Ｍ
ＰＥＡＫ２		ＯＦＦ
ＬＥＶＥＬ	ＤＥＰＥＮＤＥＮＴ	５％
ＤＡＲＫ	ＤＥＴＡＩＬ	１

	(		indicates factory default settings.)
Item	Display		Function
DETAIL SWITCH	ON		Enables or disables changes in
	OFF		contour enhancement (hard/soft)
			level of SDTV video output.
V DETAIL	0		Adjusts the amount of vertical
		׀	detail.
	3
		׀
	63
H DETAIL	0		Adjusts the amount of horizontal
		׀	detail.
	5
		׀
	63
CRISP	0		Sets the maximum amplitude of
		׀	the very faint noise components
	63		that are removed from detail
			components.
PEAK1	1.89M/2.18M/		Selects one of the two contour
	2.56M/3.17M/		correction frequency bands
	4.0M/5.28M/		(boost frequency or peak
	6.75M		frequency). Changes the contour
			width.
PEAK2	OFF/1.89M/		Selects one of the two contour
	2.18M/2.56M/		correction frequency bands
	3.17M/4.00M/		(boost frequency or peak
	5.28M/6.75M		frequency). Changes the contour
			width.

20