Rack Mounting Example

$ Rack Mounting Procedure

Multi Control Hub

To mount the multi control hub on a rack, use the supplied rack mounting brackets and mounting screws (M4a10).

1Press the power switch to turn power off.

2Remove the four feet from the bottom of the multi control hub.

Power switch

Feet

Mounting screws

Specifications

Power supply:

DC +12 V (4-pin Cannon Connector)

Power consumption:

DC 12 V, 0.47 A

Video input:

Composite video 1 V [p-p] 75 Ω a1 (BNC connector)

Camera control inputs:

Control signal (BNC connector) a5

Pan/tilt head control inputs:

Control signal (RJ-45 8-pin modular jack) a5

Operating temperature range:

+14°F to +113°F (–10°C to +45°C) Dimensions (WaHaD):

Body:

16 9/16˝a3 1/2˝a9 7/8˝ (420a88a250 mm)

Priority switchbox:

2 13/16˝a3 1/2˝a1 7/16˝

3Secure the rack mounting brackets to the sides of the multi control hub using the supplied mounting screws (a4).

4Mount the multi control hub in the rack and secure it in place using four rack mounting screws (part number W2- MSS/5008).

Switchbox

To mount the switchbox on a rack, use the supplied rack mounting brackets and mounting screws (M4a8).

Rack mounting bracket

Rack mounting screws W2-MSS/5008 (Option)

Rack mounting bracket

Mounting screws

Preview video outputs:

Composite video 1 V [p-p] 75 Ω a5 (BNC connector)

Black burst outputs:

75 Ω a6 (BNC connector)

Camera control output:

Control signal (BNC connector)

Pan/tilt head control output:

Control signal (RJ-45 8-pin modular jack)

Switch function:

Power on/off

Control panel connecting cables:

Number of connecting cables: 4 (3 coaxial cables, 1 10BASE-T straight cable); 5 sets (when using G/L function)

Pan/tilt head connecting cables:

4 connecting cables per pan/tilt head (3 coaxial cables, 10BASE-T straight cable)

(when using G/L function)

Maximum cable length:

Length of cable from camera and pan/tilt head to control panel: Max. 500 m (assuming: coaxial cable: 5C-2V, 10BASE-T straight cable: UTP category 5)

(70a88a35 mm)

Weight:

Approx. 12.32 lb (5.6 kg)

Finish:

Cover:

Steel panel with AV ivory color polyvinyl chloride finish (approximate color: Munsell 7.9Y 6.8/0.8)

Panel:

AV ivory color paint (approximate color: Munsell 7.9Y 6.8/0.8)

<Notes>

ORack mounting screws sold separately (part number W2-MSS/5008).

OTo ensure that the temperature within the rack does not exceed +113°F (+45°C), make sure to provide sufficient space (a minimum of one chassis width between units) between the multi control hub and the other pieces of equipment mounted in the rack or install a cooling fan.

Weight and dimensions indicated are approximate.

Specifications are subject to change without notice.

18

19