Table of Contents

Overview . . . . . . . . . . . . . . . . . . . . . . . .

. 4

System Connections . . . . . . . . . . . . . .

11

Accessories . . . . . . . . . . . . . . . . . . . . .

. 4

Operations. . . . . . . . . . . . . . . . . . . . . . .

17

For Your Safety. . . . . . . . . . . . . . . . . . .

. 5

Rack Mounting Example . . . . . . . . . . .

18

Controls and Their Functions . . . . . . .

. 6

$ Rack Mounting Procedure . . . . . . .

18

$ Front Panel. . . . . . . . . . . . . . . . . . .

. 6

Specifications . . . . . . . . . . . . . . . . . . . .

19

$ Rear Panel . . . . . . . . . . . . . . . . . . .

. 7

 

 

$ Priority Switchbox. . . . . . . . . . . . . .

10

 

 

Overview

O The AW-HB605 multi control hub combines with a system such as the Panasonic AW- PH300 series indoor pan/tilt head or AW-PH600 series outdoor pan/tilt head to support the connection of between one and five control panels (AW-RP501, AW-RP301, AW- RP305) to a single camera and pan/tilt head. Any of the connected control panels may then be used to control the camera and pan/tilt head (the AW-RP301 and AW-RP305 can control the pan/tilt head only).

In addition, by adding the AW-HB505 multi port hub and AW-RP505 multi hybrid control panel, it is possible to construct a system in which between one and five multi hybrid control panels may be used to control between one and five cameras and pan/tilt heads.

O When coaxial cable/s (5C-2V) and 10BASE-T (UTP category 5) straight cable/s (10BASE-T cable only for the AW-RP301 and AW-RP305) are used to make connections, the distance between the cameras and pan/tilt heads and the control panels can be extended up to a maximum of 500 meters.

Accessories

O Priority switchboxes: 5

O Rack mounting brackets: 12

O Mounting screws: 24

For Your Safety

O Use the dedicated AC adapter (AW-PS505) to supply power to the multi control hub.

O Handle with care.

The multi control hub may malfunction if it is dropped or exposed to strong shocks.

O Use within a temperature range of 14°F to 113°F (–10°C to +45°C).

Using the multi control hub in environments colder than 14°F (–10°C) or hotter than 113°F (+45°C) could have a damaging effect on the internal components.

O Connect and disconnect cables only when the power is turned off.

Make sure to turn the power to the multi control hub off before connecting or disconnecting cables.

O Avoid using the multi control hub outdoors.

O Place the multi control hub a minimum of 1 meter away from monitor video screens.

OCleaning

Unplug the multi control hub and wipe it clean using a dry cloth. For dirt that cannot be removed in this manner, moisten a cloth with kitchen detergent, wring it out thoroughly, and then wipe gently.

•Never use volatile chemicals such as benzene or paint thinner to clean the multi control hub.

•Before using chemically treated cloths to clean the multi control hub, read their instructions and precautions thoroughly.

4

5