Connections

$ When connecting a convertible camera directly

•First, turn off the power of all the equipment before proceeding with the connections.

•Use the AW-PS505 for the AC adaptor of the ROP.

Connect the DC 12V OUT socket on the AW-PS505 to the DC 12V IN socket on the ROP using the DC cable provided with the AW-PS505.

•Use the AW-PS505 for the AC adaptor of the convertible camera.

Connect the DC 12V OUT socket on the AW-PS505 to the DC 12V IN socket on the convertible camera using AW-CA4T1.

•Connect the CONTROL OUT TO CAMERA connectors [1] to [5] on the ROP with the I/F REMOTE connectors on the convertible cameras through the connecting cables (optional accessory) AW-CA50T8 or AW-CA50T9 + RS-422/RS-232C converter.

The distance between the ROP and the AW-CA50T8 or AW-CA50T9 + RS-422/RS-232C converter can be extended up to a maximum of about 1000 meters using a 10Base-T (equivalent to UTP category 5) straight cable.

$ When connecting the ROP in a system that includes pan/tilt heads, pan/tilt control panel and cable compensation unit

•First, turn off the power of all the equipment before proceeding with the connections.

•Connect the CONTROL OUT TO CONTROL PANEL connector on the ROP with the CAMERA CONTROL IN FROM ROP connector on the pan/tilt control panel using the pan/tilt control panel connecting cable provided with the ROP.

•Power will be supplied to the ROP from the pan/tilt control panel.

•For details on how to connect the pan/tilt heads, pan/tilt control panel and cable compensation unit, refer to the instruction manual provided with these units.

10