Panasonic CPC-EX manual Trunk Assignments for Single-Cabinet Systems

Chapter 4. Trunks and Lines Section 300-Installation

Trunk Assignments for Single-Cabinet Systems

•Programming is not required to associate trunk ports with slot locations. However, you must use programming to specify that a combination of T1 and analog trunks are installed, and you must also specify how many T1 channels are used.

Table 4-9. T1 and analog trunk assignments, DBS 40

		Trunk		Fractional T1			Fractional T1
		Number		using 16 Channels			using 8 Channels
		1		T1 channel 16				Analog trunk 1
		↓			↓			↓
		8		T1 channel 9				Analog trunk 8
		9		T1 channel 8				T1 channel 8
		↓			↓			↓
		16		T1 channel 1				T1 channel 1
		Note: Since the DBS 40 supports a maximum of 16 trunks, all 24 chan-
		nels of the T1 cannot be used.
Table 4-10. T1 and analog trunk assignments, DBS 72
	Trunk		24-Channel T1			Fractional T1		Fractional T1
	Number					using 16		using 8 Channels
						Channels
	1		T1 channel 24			Analog trunk 1		Analog trunk 1
		↓		↓		↓		↓
	8		T1 channel 17			Analog trunk 8		Analog trunk 8
	9		T1 channel 16			T1 channel 16		Analog trunk 9
		↓		↓		↓		↓
	16		T1 channel 9			T1 channel 9		Analog trunk 16
	17		T1 channel 8			T1 channel 8		T1 channel 8
		↓		↓		↓		↓
	24		T1 channel 1			T1 channel 1		T1 channel 1

4-14 DBS Manual - Revised April 2000 DBS-2.3/9.2-300