67

CQ-VD7200U
58
E
N
G
L
I
S
H
(a) Using the Rear Support Strap o(b) Using the Rubber Pad r
rRubber Pad
tMounting Bolt (M5)
Display Unit
Bracket
(On car)
uWasher
Assembling
Hex. Bolt
(M5 x 10 mm)*1
iWasher Assembling Hex.
Bolt (M6 x 20 mm) Fire wall of car
Drill a hole 6.5 to 7 mm
in diameter.
yFlange Nut
(M6)
Display Unit
oRear Support Strap
Method for Fixing the Rear of the Unit
qPush the right and left clamp plates outward, one at a time, and pull the display unit toward yourself.
wAfter removing the right and left clamp plates, pull the unit with both hands till it comes off.
Push here to
remove the
clamp plates.
qw
To Remove the Display Unit
*1:
Use
M5 x 8 mm size bolt (optional) if bolts other than
the supplied ones are to be used.
66 CQ-VD7200U
57
E
N
G
L
I
S
H
Installation Guide (continued)