1 TUNER PIP OPERATION WITH A VCR - NO CABLE BOX
1 Tuner PIP Operation with a VCR - No Cable Box
Note: Refer to the FEATURE COMPARISON CHART on page 3 for your television PIP capability.
This television includes a Picture In Picture (PIP) feature. A second video source (VCR) is required to provide a second picture.
Connect your television to a VCR, as shown:
|
| CONNECTION ON BACK OF TV | VCR |
| ||||
|
|
|
| |||||
|
| COMPONENT | R | AUDIO | L |
| VIDEO OUT | ANT IN |
|
| VIDEO INPUT |
| |||||
| TO AUDIO |
|
|
|
|
|
| Incoming |
| AMP |
|
| PR PB |
| Y/VIDEO |
| Cable |
|
|
|
|
|
| |||
|
| INPUT 1 |
|
|
|
| ||
| L |
|
|
|
| L |
| |
|
|
|
|
|
| AUDIO OUT |
| |
|
|
|
|
|
|
|
| |
ANT IN | R |
|
|
|
| R |
| |
|
|
|
|
|
| |||
|
|
|
|
|
|
|
| |
|
|
| R | AUDIO |
| VIDEO |
| ANT OUT |
|
| INPUT 2 | L |
|
| |||
CABLES NOT SUPPLIED
Note: The Remote Control must be programmed with the supplied codes to operate the VCR. See
Programming the Remote Control in the Remote Control Quick Reference Guide.
Procedure
Turn the VCR OFF and tune the TV to channel 3.
Press the PIP button on the Remote Control to display the PIP frame on screen.
Note: The PIP picture is the same as the Main picture, initially.
rPress the TV/VIDEO button on the Remote Control to select the VIDEO PIP source.
rPress the VCR button on the Remote Control and turn ON the VCR.
rPress the TV/VCR button on the Remote Control.
rChoose channels for PIP frame by pressing VCR CHANNEL up/down buttons on the Remote Control.
rChoose channels for the Main Picture by pressing the TV button on the Remote Control and using the numeric keypad or CH up/down buttons.
SWAP and RECALL Buttons
The SWAP button switches the PIP and Main Picture source. Press the RECALL button for on screen PIP and Main Picture source status.
10