–57–
Status Displays Inside the Viewfinder Screen
In addition to images, messages indicating the unit’s settings and operating status appear on the
viewfinder screen. The center marker and safety zone marker, etc. are also displayed.
When the MENU SET/OFF switch is set to OFF, items set to SET at the VF DISPLAY page of the
setting menu and using related switches appear at the top and bottom of the screen.
Messages informing of the setting contents or of the adjustment course or results can also be
displayed for approximately 3 seconds when settings are changed, during the course of adjust-
ments, or after adjustments have been completed.
ÁSee “Selecting Display Items” (page 60) for selecting display items, “Display Mode and Setting
Change Message” (page 61) for the setting change message, and “Setting the Marker Displays”
(page 62) for the marker displays.
The display positions of all items which can be displayed are shown in the figure below.
eExtender display
fShutter speed/mode display
gRemaining tape length display
hRemaining battery level display
iFilter display
jWhite balance memory display
kGain value display
lAudio level display
mIris value display
nWarning display
oSafety zone marker
pCenter marker
qSuper iris ON or super black ON display
rMARK1/MARK2/TAKE display
sTCG (Time Code Generator) display
tMaster gain & super gain setting display
uBattery setting display
EX21 A 0dB F5.6T_M1-------1/250 30-25 14.6V
1 2 q 3 s 4
o
o
o
u
o
n
r
p
5 6 7 8 9
S
t
NiCd12
|Note{
When in SUPER V mode, “SUP.V” is displayed at shutter speed position f in the Viewfinder
screen.