- 39 -
Basic
Refer to P28 for information about how to play back pictures.
When you play back pictures on a PC, they cannot be displayed in t he rotated direction unless
the OS or software is compatible with Exif. Exif is a file format for still pictures which allows
recording information etc. to be added. It was established by “JEITA (Japan Electronics and
Information Technology Industries Association)”.
It may not be possible to rotate pictures that have been recorded with other equipment.
The display is not rotated during Multi Playback.
Use a battery with sufficient battery power or the AC adaptor (optional) and DC coupler
(optional) when formatting. Do not turn the camera off during formatting.
If a card has been inserted, only the card is formatted. To format the built-in memory, remove
the card.
If the card has been formatted on a PC or other equipment, format it on the camer a again.
It may take longer to format the built-in memory than the card.
If you cannot format, contact the dealer or your nearest Service Centre.
M [Rotate Disp.]
This mode allows you to display pictures vertically if they were
recorded holding the camera vertically. (Playback Mode only)
[]:It will rotate and display vertically.
[]: It will display vertically only when playing back
connected to a TV.
[OFF]
[Version Disp.] It is possible to check which version of firmware is on the camera.
[Format] The built-in memory or card is formatted. Formatting irretrievably
deletes all the data so check the data carefully before formatting.