Basic
- 40 -
•Calibration is not done if correct position is not touched. Touch the [i] mark again.
•If you set a different language by mistake, select [~] from the menu icons to set the desired
language.
•The Stabilizer function is switched between [ON] and [OFF] every time [Stabilizer] is touched
during the [Stabilizer Demo.].
•In Playback Mode, [Stabilizer Demo.] cannot be displayed.
•[Stabilizer Demo.] is an approximation.
•[Auto Demo] has no TV output capability even when it is in Playback Mode.
[Calibration]
Adjust the position of the touch panel if a different thing gets
selected from what you touched or touch operation does not
respond.
1Touch [Start].
2Touch the orange [r] mark
displayed on the screen in order
with the stylus pen (supplied)
(5 places).
•A message is displayed once the
position is set.
3Touch [End] to finish.
~ [Language] Set the language displayed on the screen.
[Demo Mode]
Displays the amount of jitter the camera has detected. ([Stabilizer
Demo.])
The camera’s features are displayed as slide shows.
([Auto Demo])
[Stabilizer Demo.]:
AAmount of jitter
BAmount of jitter after correction
[Auto Demo]:
[ON]/[OFF]
DEMO
A B